Secure Digital Call Recorder

It's time to escape the tape >

Thank you for purchasing the Secure Digital Recorder v. 2.0.

The redesigned SD Recorder and associated software is being released in phases. As new releases that support additional features and functions are released they will be posted to this page on our website.

Updating the firmware is a simple process as described below:

1. Power Off the SD Recorder
2. Remove the batteries
3. Remove the SD Card from the SD Recorder
4. Insert the SD Card into an SD Card Reader on your pc and locate and delete all files on the card EXCEPT the RECORD folder if you want to keep any existing recordings
5. Download the firmware file below and unzip it to the SD card
6. Insert the SD Card into the SD Recorder (make sure power is still off before inserting)
7. Power ON the Sd Recorder
8. The update process may take a few minutes. During this time the lights will light and the display will change.
9. When the display goes blank and no longer changes, power off the SD Recorder
10. Insert the batteries (if desired)
11. Power on the SD Recorder.

At this time the SD Recorder is ready for use. Please reconnect your lines and use as normal.

If you have any questions you can submit a case on the technical support page.

 

SD Recorder Firmware Download (Version 1.01.36)